MC74LVXT4051MG
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 2.05mm |
| RoHS Status | RoHS Compliant |
MC74LVXT4051MG Overview
Due to its 16-SOIC (0.209, 5.30mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -55°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. Circuits number 1 make up this analogue multiplexer. Try searching for the analog switch ic with MC74LVXT4051 if you are looking for variants. This digital multiplexer has 55Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. The digital multiplexer has a low cost Dual supply. 2.5V is the lowest voltage the electrical component should receive. For this digital switch to work, 40μA current would suffice. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. You should attach at least 1.25V voltage if you are using dual power supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating the 8 inputs requires 8 inputs. There are 80MHz bandwidths for data transfer.
MC74LVXT4051MG Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4051MG Applications
There are a lot of ON Semiconductor MC74LVXT4051MG Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Power routing
- Automatic test equipment
- SDH
- Central office
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Modems
- Access Concentrators
- Fiber In The Loop (FITL)
- High-Voltage
