MC74LVXT4052D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74LVXT4052 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | 4PST |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT4052D Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 16. A electrical component with 4 channels is capable of high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. These analog multiplexers are built based on SP4T switching circuits. 2 circuits are used in this analogue multiplexer. Try searching with MC74LVXT4052 to find analog multiplexer variants. An switch multiplexer with 55Ohm internal resistance has a value of 55Ohm. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. Dual supply type digital switch with a low cost. The switch device would be able to operate with 40μA current. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. This electrical part is compatible with 6V operating voltages. There are 80MHz bandwidths for data transfer.
MC74LVXT4052D Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4052D Applications
There are a lot of ON Semiconductor MC74LVXT4052D Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Switching Systems
- Battery-powered systems
- Microwave transmission systems
- Fiber to the Home
- Channel Banks
- Mechanical reed relay replacement
- DSLAMs
- T1/E1 Terminals
- Cable Telephony – NIU, Set-Top Box, Home Side Box
