MC74LVXT4052DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4052 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | 4PST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT4052DT Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 4:1. Extended operating temperature around -55°C~125°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 16 pins are injected into the body of the electronic part. Circuits based on SP4T switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. Using the MC74LVXT4052 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 55Ohm. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. Analogue multiplexer with a Dual supply type that is cost-effective. For this multiplexer to operate, 40μA current would be sufficient. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. 6V operating voltages are supported by the electronic component. 80MHz-bandwidths can be used to transfer data between multiplexers.
MC74LVXT4052DT Features
1 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4052DT Applications
There are a lot of ON Semiconductor MC74LVXT4052DT Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- High reliability control systems
- Sample-and-hold systems
- DSLAMs
- Communication systems
- Cable Modem
- Sample hold systems
- E1 Multiplexer
- PCMCIA cards
- T1/E1 Terminals
