Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVXT4052 |
Pin Count |
16 |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
40μA |
Power Dissipation |
450mW |
Throw Configuration |
4PST |
Propagation Delay |
40 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±2.5V~6V |
Halogen Free |
Halogen Free |
Supply Type |
Dual |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
3V |
On-State Resistance (Max) |
26Ohm |
Min Dual Supply Voltage |
1.25V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SP4T |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74LVXT4052DTG Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. There is 4:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -55°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. A SP4T switching circuit is used for these analog switches. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with MC74LVXT4052. The internal resistance of this digital multiplexer is 55Ohm. To find out what the 16 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. An effective Dual supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2.5V. For this digital switch to work, 40μA current would suffice. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 3V. You should attach at least 1.25V voltage if you are using dual power supply. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. It is possible to operate 8 inputs. There are 80MHz bandwidths for data transfer.
MC74LVXT4052DTG Features
1 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4052DTG Applications
There are a lot of ON Semiconductor MC74LVXT4052DTG Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Battery-powered systems
- Mechanical reed relay replacement
- Audio and video signal routing
- Cellular phones
- Isolation
- Communication systems
- SDH
- Switching Systems
- T1/E1 Terminals