MC74LVXT4052DTRG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4052 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Throw Configuration | 4PST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±2.5V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3V |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74LVXT4052DTRG Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. There are 16 terminations totally. A 4 channel electronic part produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. Based on SP4T switching circuits, these analog multiplexers work. 2 circuits are used in this analogue multiplexer. MC74LVXT4052 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 55Ohm. Datasheets for functions of 16 pins are available. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Digital switch that provides Dual power at a cost-effective price. There should be 2.5V voltage fed to the electrical part below 2.5V. For this digital switch to work, 40μA current would suffice. If put voltage greater than 3V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 1.25V. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. A 8 input needs to be operated. There are various bandwidths available for data transfer.
MC74LVXT4052DTRG Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4052DTRG Applications
There are a lot of ON Semiconductor MC74LVXT4052DTRG Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Central office
- Power routing
- Access Concentrators
- MP3 players
- CSU
- SONET/SDH ADM
- Channel Banks
- ISDN NT1/TA
- Digital cross connects (DSX-1)
