MC74LVXT4052MELG

SP4T 26Ohm Analog Switches BREAK-BEFORE-MAKE MC74LVXT4052 16 Pins 100nA 3V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74LVXT4052MELG
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 132
Description: SP4T 26Ohm Analog Switches BREAK-BEFORE-MAKE MC74LVXT4052 16 Pins 100nA 3V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	55Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74LVXT4052
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	40μA
Throw Configuration	4PST
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2.5V~6V ±2.5V~6V
Supply Type	Dual
Bandwidth	80MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	3V
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
RoHS Status	RoHS Compliant
Lead Free	Lead Free

MC74LVXT4052MELG Overview

Presented in 16-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. A 3V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. A SP4T switching circuit is used for these analog switches. A total of 2 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with MC74LVXT4052. Internally, this switch multiplexer has a resistance of 55Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The digital multiplexer has a low cost Dual supply. It is recommended to use 2.5V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 40μA. If put voltage greater than 3V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 1.25V. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. In order to operate the 8 inputs, there are several steps to follow. 80MHz bandwidths enable data to be transferred.