MC74LVXT4052MG

SP4T 26Ohm Analog Switches BREAK-BEFORE-MAKE MC74LVXT4052 16 Pins 100nA 3V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74LVXT4052MG
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 538
Description: SP4T 26Ohm Analog Switches BREAK-BEFORE-MAKE MC74LVXT4052 16 Pins 100nA 3V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2.5V~6V ±2.5V~6V
Supply Type	Dual
Bandwidth	80MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	3V
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	55Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74LVXT4052
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	40μA
Throw Configuration	4PST
Propagation Delay	40 ns
Turn On Delay Time	40 ns

MC74LVXT4052MG Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.209, 5.30mm Width). High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Increasing operating temperature to around -55°C~125°C TA. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. A SP4T switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Use MC74LVXT4052 to search for variants of the digital switches. There is 55Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. Analog switch ics with Dual supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.5V. An operating current of 40μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 3V. You should attach at least 1.25V voltage if you are using dual power supply. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. It is possible to operate 8 inputs. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.