MC74LVXT4053DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT4053DTR2 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Around -55°C~125°C TA is the extended operating temperature. There are 16 terminations totally. The electronic part provides high-quality output because it has 1 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Based on SPDT switching circuits, these analog multiplexers work. This multiplexer is composed of 3 circuits. Try searching for MC74LVXT4053 variants of the analog switch ic. An switch multiplexer with 55Ohm internal resistance has a value of 55Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. Analogue multiplexer with a Dual supply type that is cost-effective. The switch device would be able to operate with 40μA current. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. This electrical part is compatible with 6V operating voltages. This switch operates within the bandwidth of 80MHz.
MC74LVXT4053DTR2 Features
1 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4053DTR2 Applications
There are a lot of ON Semiconductor MC74LVXT4053DTR2 Analog Switches & Multiplexers ICs applications.
- Transmit
- Multiplexers
- SDH/SONET multiplexers
- Sample hold systems
- Optical Applications
- Cable PC
- Digital Cross-Connects
- Medical
- Cellular phones
- Private Branch Exchange (PBX)
