MC74LVXT4053M
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74LVXT4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V ±6V |
| Supply Type | Dual |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 28ns |
| Switch-off Time-Max | 28ns |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 55Ohm |
MC74LVXT4053M Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.209, 5.30mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature extended to -55°C~125°C TA. A total of 16 terminations have been recorded. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. These analog multiplexers are built based on SPDT switching circuits. The circuits in this analogue multiplexer number 3. Try searching for MC74LVXT4053 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 55Ohm. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Digital switch that provides Dual power at a cost-effective price. In order to operate this switch device, it would need a current of 40μA. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electronic component can function from 6V. The transfer of data can be performed over 80MHz bandwidths.
MC74LVXT4053M Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4053M Applications
There are a lot of ON Semiconductor MC74LVXT4053M Analog Switches & Multiplexers ICs applications.
- MP3 players
- Isolation
- 65 V DACs
- Central office
- Relay Replacement
- Switching Systems
- T1/E1 Terminals
- PDH Multiplexers
- Medical systems
- SONET
