MC74LVXT4066DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74LVXT4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 150MHz |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switch-on Time-Max | 25ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT4066DR2 Overview
Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around -55°C~85°C TA. A total of 14 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 14 series. Multiplexers built on a SPST - NO switching circuit are built. This multiplexer is composed of 4 circuits. Search with MC74LVXT4066 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 30Ohm. Please refer to the datasheets for 14 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. An effective Single supply digital multiplexer. The switch device would be able to operate with 40μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. It can operate from 5.5V operating voltages. This switch operates within the bandwidth of 150MHz.
MC74LVXT4066DR2 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 160MHz
Bandwidth: 150MHz
MC74LVXT4066DR2 Applications
There are a lot of ON Semiconductor MC74LVXT4066DR2 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Wireless Local Loop
- DSLAMs
- Fault Tolerant Systems
- Sample hold systems
- Digital Cross-Connects
- Medical systems
- Data Acquisition Systems
- Medical Instrumentation
- E1 Network Equipment
