MC74LVXT4066DR2G
| Parameters | |
|---|---|
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 40Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 150MHz |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switch-on Time-Max | 25ns |
MC74LVXT4066DR2G Overview
Due to its 14-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~85°C TA. Total terminations are 14. A electrical component with 1 channels is capable of high-quality output. A 3V voltage supply should turn on and run the electronic component. The electrical component body receives 14 pins. These analog multiplexers are built based on SPST - NO switching circuits. Using the MC74LVXT4066 search parameter, you can discover variants of the switch. It has an internal resistance of 40Ohm. The functions of 14 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. In order to operate this switch device, it would need a current of 40μA. Using a single voltage supply, this switch device consumes 2V~5.5V volts. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. It is possible to operate 4 inputs. 150MHz bandwidths enable data to be transferred.
MC74LVXT4066DR2G Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 160MHz
Bandwidth: 150MHz
MC74LVXT4066DR2G Applications
There are a lot of ON Semiconductor MC74LVXT4066DR2G Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- High speed data transmission line cards
- Low-Voltage
- Battery Powered Systems
- Remote Powered Equipment
- Cross Connects
- Switching Systems
- Power routing
- Communication systems
- PCMCIA cards
