MC74LVXT4066DTR2

SPST - NO 20Ohm DUAL Analog Switches MC74LVXT4066 14 Pins 100nA 3V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74LVXT4066DTR2
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 422
Description: SPST - NO 20Ohm DUAL Analog Switches MC74LVXT4066 14 Pins 100nA 3V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-55°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	30Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	0.65mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74LVXT4066
Output	SEPARATE OUTPUT
Pin Count	14
Qualification Status	Not Qualified
Power Supplies	3.3V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	40μA
Power Dissipation	450mW
Throw Configuration	SPST
Propagation Delay	4 ns
Turn On Delay Time	20 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	4
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	30 ns
-3db Bandwidth	160MHz
On-State Resistance (Max)	20Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	37 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	25Ohm
Switch Circuit	SPST - NO
Channel-to-Channel Matching (ΔRon)	10 Ω
Switch-on Time-Max	25ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MC74LVXT4066DTR2 Overview

Shipping overseas is convenient due to the electrical component's packing in 14-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -55°C~85°C TA extended. Total terminations are 14. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. There are 14 pins injected into the electronic part body. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with MC74LVXT4066 if you're looking for variants. As far as internal resistance is concerned, it has 30Ohm. For functions related to 14 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. There should be 2V voltage fed to the electrical part below 2V. This multiplexer would work with 40μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. In order to operate the 4 inputs, there are several steps to follow. In 150MHz-bandwidths, data can be transferred.