Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.209, 5.30mm Width) |
Number of Pins |
14 |
Operating Temperature |
-55°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
Resistance |
30Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
unknown |
Base Part Number |
MC74LVXT4066 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
3.3V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
40μA |
Max Supply Current |
4μA |
Throw Configuration |
SPST |
Turn On Delay Time |
20 ns |
Logic Function |
Demultiplexer, Multiplexer |
Supply Type |
Single |
Turn-Off Delay Time |
30 ns |
-3db Bandwidth |
160MHz |
On-State Resistance (Max) |
20Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
37 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
25Ohm |
Switch Circuit |
SPST - NO |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switch-on Time-Max |
25ns |
Switch-off Time-Max |
35ns |
Voltage - Supply, Single (V+) |
2V~5.5V |
Normal Position |
NO |
Height Seated (Max) |
2.05mm |
Length |
10.2mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74LVXT4066MEL Overview
Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.209, 5.30mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -55°C~85°C TA are extended for operation. Totally, there are 14 terminations. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. It is part of the design of the 14 series that this electronic component is included. Multiplexers built on a SPST - NO switching circuit are built. It consists of 4 circuits. Use MC74LVXT4066 to search for variants of the digital switches. In this multiplexer, the internal resistance is 30Ohm. Datasheets for functions of 14 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2V. It would be sufficient to run this analogue multiplexer with 40μA current. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. If you put voltage higher than 4μA on the digital multiplexer, damage may occur. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electrical part can be operated at 5V voltage levels.
MC74LVXT4066MEL Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 160MHz
MC74LVXT4066MEL Applications
There are a lot of ON Semiconductor MC74LVXT4066MEL Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Isolation
- New designs requiring multiplexer functions
- HDTV
- Avionics test equipment
- Cross Connects
- MP3 players
- Medical
- Battery Powered Instruments
- DVD-R