MC74LVXT8051D
| Parameters | |
|---|---|
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~6V |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74LVXT8051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 40μA |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
MC74LVXT8051D Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~85°C TA. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 8 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 16 series. Circuits number 1 make up this analogue multiplexer. Try searching for the analog switch ic with MC74LVXT8051 if you are looking for variants. This digital multiplexer has 30Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. A cost-effective Single supply type analogue multiplexer. For this multiplexer to operate, 40μA current would be sufficient. The voltage required by this switch device is 2V~6V, draining from a single voltage supply. Operating voltages of 6V are compatible with the electrical part. 80MHz bandwidths enable data to be transferred.
MC74LVXT8051D Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT8051D Applications
There are a lot of ON Semiconductor MC74LVXT8051D Analog Switches & Multiplexers ICs applications.
- DSUs
- E1 Multiplexer
- Microwave transmission systems
- Relay replacements
- Automatic test equipment
- SDH/SONET multiplexers
- Battery Powered Instruments
- Data switching
- Audio/video switches
- Medical
