MC74LVXT8051DR2G
| Parameters | |
|---|---|
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.02A |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74LVXT8051 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
MC74LVXT8051DR2G Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Operational temperature extended around -55°C~85°C TA. There are 16 terminations totally. The electronic part provides high-quality output because it has 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. There are 1 circuits in this switch device. Use MC74LVXT8051 to search for variants of the digital switches. There is 30Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 6V in normal situations. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2V. This multiplexer would work with 40μA current. Using a single voltage supply, this switch device consumes 2V~6V volts. Operating 8 inputs is required. 80MHz-bandwidths can be used to transfer data between multiplexers.
MC74LVXT8051DR2G Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT8051DR2G Applications
There are a lot of ON Semiconductor MC74LVXT8051DR2G Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Modems
- Intelligent PBX
- Fiber In The Loop (FITL)
- Digital access cross connects
- Routers
- Imaging
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Audio and video routing
- Fiber to the Home
