MC74LVXT8051M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MC74LVXT8051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 40μA |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT8051M Overview
Presented in 16-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -55°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 8 channels. A 3V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. A 1 circuit is present in this switch device. Try searching with MC74LVXT8051 to find analog multiplexer variants. This digital multiplexer has 30Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. An effective Single supply digital multiplexer. In order to operate this switch device, it would need a current of 40μA. Using only a single voltage supply, this analog switch requires 2V~6V voltage. This electrical part is compatible with 6V operating voltages. It is possible to transfer data over a 80MHz-bandwidth.
MC74LVXT8051M Features
8 Channels
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT8051M Applications
There are a lot of ON Semiconductor MC74LVXT8051M Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Sample-and-hold systems
- Remote Powered Equipment
- Precision data acquisition
- Precision test equipment
- Intelligent PBX
- Wireless Local Loop
- Ultrasound
- Avionics and Military Systems
- Frame Relay Equipment
