MC74LVXT8053DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74LVXT8053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT8053DR2 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -55°C~85°C TA. In total, 16 terminations have occurred. A 2 channel electronic part produces high-quality output. A 3V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. Based on SPDT switching circuits, these analog multiplexers work. Circuits number 3 make up this analogue multiplexer. Look for analog switch ic variants by searching with MC74LVXT8053. As far as internal resistance is concerned, it has 30Ohm. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. A analog switch ic that has a cost-effective Single supply type. This multiplexer would work with 40μA current. Using a single voltage supply, this switch device consumes 2V~6V volts. The electrical part can be operated at 6V voltage levels. The transfer of data can be performed over 120MHz bandwidths.
MC74LVXT8053DR2 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVXT8053DR2 Applications
There are a lot of ON Semiconductor MC74LVXT8053DR2 Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- HDTV
- Audio and video signal routing
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Medical systems
- Communications systems
- 65 V DACs
- DSLAMs
- Cable PC
- Automotive applications
