MC74LVXT8053MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MC74LVXT8053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74LVXT8053MEL Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to -55°C~85°C TA. In total, 16 terminations have occurred. A 2 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 16 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. Circuits number 3 make up this analogue multiplexer. Try searching with MC74LVXT8053 to find analog multiplexer variants. There is 30Ohm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Analogue multiplexers of the Single supply type that are cost-effective. 40μA current would be enough for this multiplexer to operate. This analog switch requires a voltage of 2V~6V to drain from a single voltage supply. Operating voltages range from 6V. 120MHz-bandwidths can be used to transfer data between multiplexers.
MC74LVXT8053MEL Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVXT8053MEL Applications
There are a lot of ON Semiconductor MC74LVXT8053MEL Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- RGB switches
- Avionics test equipment
- Communication systems
- Routers
- Signal routing between systems
- Automotive applications
- Cable Modem
- Multi-Line E1 Interface Cards
- E1 Network Equipment
