MC74LVXT8053MELG
| Parameters | |
|---|---|
| Propagation Delay | 4 ns |
| Turn On Delay Time | 30 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74LVXT8053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
MC74LVXT8053MELG Overview
As the electronic part is packed in 16-SOIC (0.209, 5.30mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -55°C~85°C TA. 16 terminations have been made so far. The electronic part provides high-quality output because it has 2 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Circuits based on SPDT switching are used to construct these analog switch ics. Circuits number 3 make up this analogue multiplexer. MC74LVXT8053 can be used to search for analog multiplexer variants. It has an internal resistance of 30Ohm. The datasheets for the 16 pins explain the functions. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. The digital multiplexer has a low cost Single supply. It is recommended that the electrical component receives a voltage of 2V. The switch device would be able to operate with 40μA current. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. In order to operate the 6 inputs, there are several steps to follow. In 120MHz-bandwidths, data can be transferred.
MC74LVXT8053MELG Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVXT8053MELG Applications
There are a lot of ON Semiconductor MC74LVXT8053MELG Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- RGB switches
- SONET
- Cable PC
- Precision test equipment
- Frame Relay Equipment
- High reliability control systems
- E1 Multiplexer
- PBX interfaces
- Fiber In The Loop (FITL)
