MC74LVXT8053MG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74LVXT8053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Throw Configuration | DPST |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 30 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LVXT8053MG Overview
Presented in 16-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -55°C~85°C TA. Total terminations are 16. By its 2 channels, the electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. SPDT switching circuits are used in these analog switch ics. There are 3 circuits in this multiplexer. MC74LVXT8053 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 30Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage the electrical component should receive. 40μA current would be enough for this multiplexer to operate. The voltage required by this switch device is 2V~6V, draining from a single voltage supply. Among the inputs that can be operated are the 6 inputs. The transfer of data can be performed over 120MHz bandwidths.
MC74LVXT8053MG Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74LVXT8053MG Applications
There are a lot of ON Semiconductor MC74LVXT8053MG Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Microprocessor Controlled Analog Systems
- Wireless Local Loop
- DSLAMs
- Video signal routing
- Cellular phones
- High speed data transmission line cards
- Public switching systems
- Audio and video switching
- Data Acquisition Systems
