MC74VHC138DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC138 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 18.5 ns |
| Quiescent Current | 4μA |
| Family | AHC/VHC |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC138DTR2 Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2V~5.5V voltage.Multiplexers of the 74VHC series can be used in a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74VHC138, so you can find its logic switch related parts using that number.The multiplexer is supplied with 3.3V voltage.This turn signal switch consists of 16 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.This multiplexer ic has 16 pins configured.It is mounted in the way of Surface Mount.The logic switch is a member of the family of AHC/VHC.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 2/5.5V.Decoder/Drivers is the classification for this the digital switch ic.Without the influence of external factors, it consumes 4μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TAPE AND REEL.A voltage level can be inserted into the 3 input lines of multiplexers.Signal sources consist of output lines of 8.
MC74VHC138DTR2 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/5.5V
3 input lines
8 output lines
MC74VHC138DTR2 Applications
There are a lot of ON Semiconductor MC74VHC138DTR2 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- D/A converters
- VGA
- CPU memory location identification
- LVDS
- HD surveillance system
- Electronic circuits
- Recording transmission
- Computer memory
- Decimal decoder
