MC74VHC157DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC157 |
| Pin Count | 16 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 250mW |
| Throw Configuration | DPST |
| Propagation Delay | 13.2 ns |
| Family | AHC/VHC |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC157DTR2G Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Multiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~5.5V supply voltage.The multiplexers can be used for a wide range of applications since they are members of 74VHC series.The basic configuration of this system includes 16 terminations.The base part number is 74VHC157, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 3.3V volts.A component pin count of 16 is found on this turn signal switch.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.There are 16 pins on it.The mounting point is Surface Mount.The logic switch is included into the family of AHC/VHC.Keeping Vsup at 2V will prevent some unwanted failures.Avoid unnecessary failures by keeping Vsup at 5.5V.Normally, 2/5.5V is powered by a battery.The switches packaging is based on TAPE AND REEL.Voltage levels are accepted through 8 input lines of multiplexers.A signal source has 4 output lines.
MC74VHC157DTR2G Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/5.5V
8 input lines
4 output lines
MC74VHC157DTR2G Applications
There are a lot of ON Semiconductor MC74VHC157DTR2G Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- GLAN
- Steel plants
- Make half adder
- Combinational circuit
- Robotic vehicles
- Microprocessor instruction decoding
- HDMI applications
- Microprocessor memory systems
- RF-based home automation system
