MC74VHC1G07DFT1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SC |
| Number of Pins | 70 |
| Packaging | Tape and Reel |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Number of Terminations | 5 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Gates |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Power Dissipation-Max | 150mW |
| Load Capacitance | 50pF |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 14.5 ns |
| Family | AHC/VHC |
| Logic Function | Buffer, Inverting |
| Output Characteristics | OPEN-DRAIN |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Low Level Output Current | 8mA |
| Schmitt Trigger | NO |
| Length | 2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC1G07DFT1 Overview
Logical driver uses a neat SC package. Tape and Reel external packaging. 5 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This logical driver is a member of the AHC/VHC family. 5 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 70 pins. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Gates. In quiescent state, the electronic part uses 1μA. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 8mA to its low level. Voltage used to run voltage buffer should be 2V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is sufficient to make 1 outputs.
MC74VHC1G07DFT1 Features
Gates
High Level Output: 8mA
MC74VHC1G07DFT1 Applications
There are a lot of ON Semiconductor MC74VHC1G07DFT1 Buffers & Transceivers applications.
- Optical sub-assembly (OSA)
- Home theater wiring-free
- Wireless access points
- IP cameras
- Indoor ad hoc meeting
- Single fiber bidirectional application
- Car alarm systems
- Gigabit Ethernet
- Transmission stations
- Interconnection between switches and computers
