MC74VHC1G66DFT2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 60Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 150mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74VHC1G66 |
| Pin Count | 5 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 25mA |
| Power Dissipation | 150mW |
| Throw Configuration | SPST |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 40 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 150MHz |
| Turn-Off Delay Time | 40 ns |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 40Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC1G66DFT2G Overview
Shipping overseas is convenient due to the electrical component's packing in 5-TSSOP, SC-70-5, SOT-353. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. Totally, there are 5 terminations. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. It is injected into the electrical part body with 5 pins. A SPST - NO switching circuit is used to build these analog multiplexers. If you are looking for variants of the digital switch, trying search with MC74VHC1G66. There is 60Ohm internal resistance in this digital multiplexer. To find out what the functions of 5 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. It would be sufficient to run this analogue multiplexer with 1μA current. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. There are various bandwidths available for data transfer.
MC74VHC1G66DFT2G Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 180MHz
Bandwidth: 150MHz
MC74VHC1G66DFT2G Applications
There are a lot of ON Semiconductor MC74VHC1G66DFT2G Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Switching Systems
- Relay Replacement
- Optical Applications
- Communication systems
- Video switching
- SONET/SDH ADM
- Microprocessor controlled systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- E1 Network Equipment
