MC74VHC1G66DTT1
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 40Ohm |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74VHC1G66 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Max Supply Current | 25mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 40 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 40 ns |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 40Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC1G66DTT1 Overview
Shipping overseas is convenient due to the electrical component's packing in SOT-23-5 Thin, TSOT-23-5. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. Total terminations are 5. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. This electronic part can be found in the 5 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. It consists of 1 circuits. MC74VHC1G66 can be used to search for analog multiplexer variants. An switch multiplexer with 40Ohm internal resistance has a value of 40Ohm. To find out what the functions of 5 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 5.5V voltage to the switch device. The digital multiplexer has a low cost Single supply. 2V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 1μA current. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. If put voltage greater than 25mA on the device, damage may be caused to the analogue multiplexer. This electrical part is compatible with 5V operating voltages.
MC74VHC1G66DTT1 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 180MHz
MC74VHC1G66DTT1 Applications
There are a lot of ON Semiconductor MC74VHC1G66DTT1 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- DSLAMs
- Data Acquisition Systems
- Battery-powered systems
- Multiplexers
- Communication systems
- Cross Connects
- Data switching
- Avionics test equipment
- DVD-R
