MC74VHC1GT66DTT1
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 40Ohm |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC74VHC1GT66 |
| Output | SEPARATE OUTPUT |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 40 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 40 ns |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 40Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC1GT66DTT1 Overview
Due to its SOT-23-5 Thin, TSOT-23-5 packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 5. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. A key feature of the 5 series is the inclusion of this electronic part as part of its design. A SPST - NO switching circuit is used for these analog switches. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with MC74VHC1GT66. An switch multiplexer with 40Ohm internal resistance has a value of 40Ohm. To find out what the 5 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 2V. This multiplexer would work with 1μA current. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. There are SEPARATE OUTPUT outputs on this analog switch ic. It can operate from 5V operating voltages.
MC74VHC1GT66DTT1 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 180MHz
MC74VHC1GT66DTT1 Applications
There are a lot of ON Semiconductor MC74VHC1GT66DTT1 Analog Switches & Multiplexers ICs applications.
- Communications systems
- SDH
- Digital access cross connects
- High speed data transmission line cards
- Battery Powered Instruments
- Intelligent PBX
- Private Branch Exchange (PBX)
- Fiber to the Home
- Video signal routing
- Audio/video switches
