Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
172.98879mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Published |
2006 |
Series |
74VHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method |
RAIL |
Max Power Dissipation |
180mW |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74VHC257 |
Pin Count |
16 |
Circuit |
4 x 2:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Power Dissipation |
180mW |
Throw Configuration |
DPST |
Propagation Delay |
7.9 ns |
Family |
AHC/VHC |
Logic Function |
Multiplexer, Mux |
Output Characteristics |
3-STATE |
Halogen Free |
Halogen Free |
Current - Output High, Low |
8mA 8mA |
Supply Type |
Single |
Output Polarity |
TRUE |
Number of Input Lines |
8 |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Number of Output Lines |
4 |
Height |
1.05mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74VHC257DTG Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.Tube represents its packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74VHC series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.There is a base part number 74VHC257 that can be used to locate signal switch's related components as well.In this case, 3.3V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 16 component pins.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.With 16 pins, it is configured.Surface Mount is the way it is mounted.There is a family of AHC/VHC members.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.For mux switch's normal operation, there is a power supply provided at 2/5.5V.RAIL is used to package the switches.Voltage levels are accepted through 8 input lines of multiplexers.As the signal source, there are 4 output lines.
MC74VHC257DTG Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/5.5V
8 input lines
4 output lines
MC74VHC257DTG Applications
There are a lot of ON Semiconductor MC74VHC257DTG Signal Switches / Multiplexers / Decoders applications.
- Logic gates for other digital devices
- High-performance memory systems
- Analog to digital conversion
- GLAN
- Data communication
- Data bus control
- HDMI applications
- Injectors
- HD surveillance system
- War field flying robot with a night vision flying camera