MC74VHC259MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ADDRESS LATCHES |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 4.9 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type, Addressable |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC259MEL Overview
The 16-SOIC (0.209, 5.30mm Width) package contains it. A Tape & Reel (TR) package is used to package it. There is a Standard output configured. This electrical device has Logic type D-Type, Addressable. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 2V~5.5V is used as the supply voltage for this device. A temperature of -55°C~125°C is set as the operating temperature. An FPGA in this series belongs to the 74VHC family. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. As a member of the 74VHC259 family, it falls under that category. A 3.3V voltage supply is required for operation. 16 pins are included. It is a member of the AHC/VHC family of electronic devices. The device has 16 pins. Surface Mount is used to mount this electronic part. This part can be found within the FF/Latches subcategory. When Vsup reaches 5.5V, the maximal supply voltage is reached. There are 2/5.5V power supplies attached to it. It is recommended to have a higher supply voltage (Vsup) than 2V. On the basis of its reliability, this device is well suited for TAPE AND REEL. It achieves superior flexibility by using 8 circuits. There is also ADDRESS LATCHES characteristics to it.
MC74VHC259MEL Features
16-SOIC (0.209, 5.30mm Width) package
74VHC series
8 Bits
74VHC259 family
16 pin count
16 pins
2/5.5V power supplies
MC74VHC259MEL Applications
There are a lot of ON Semiconductor MC74VHC259MEL Latches applications.
- Multi-line decoders
- Address register
- Counters
- Watches
- Multistage ripple counting
- Phase comparator
- BCD counting
- Clocks
- Parallel data storage
- Shift Registers
