MC74VHC373DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 75mA |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.9 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 8 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC373DTR2G Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the way in which it is packaged. It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is used for operation. An FPGA in this series belongs to the 74VHC family. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74VHC373 family. The supply voltage of the device is 3.3V. There are 20 pins attached to it. AHC/VHC is the family of this electronic device. There are 20 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. 2 ports are available on this device. The part is in the FF/Latches subcategory. 5.5V is the maximum voltage (Vsup) that can be supplied. It operates from 2/5.5V power supplies. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. Based on its reliable performance, this device is appropriate for TAPE AND REEL. Input lines are converted into binary equivalents by 8 output lines. Without external influences, it consumes 4μA quiescent current. This element consists of 1.
MC74VHC373DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74VHC series
8 Bits
74VHC373 family
20 pin count
20 pins
2/5.5V power supplies
1 elements
MC74VHC373DTR2G Applications
There are a lot of ON Semiconductor MC74VHC373DTR2G Latches applications.
- Decade counting
- Automotive Cluster
- Communication systems
- Automotive Infotainment
- Accumulator Registers
- Serial Input
- Double bus register system
- Up-Down Johnson
- Parallel-to-Serial Data Conversion
- Shift left with parallel loading
