Parameters |
Number of Output Lines |
3 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
74VHC |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74VHC373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
9.2 ns |
Turn On Delay Time |
4.9 ns |
Family |
AHC/VHC |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Number of Input Lines |
8 |
Independent Circuits |
1 |
MC74VHC373DWR2 Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). Packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Surface Mount. A voltage of 2V~5.5V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74VHC series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74VHC373. The supply voltage of the device is 3.3V. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the AHC/VHC family. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. It operates from 2/5.5V power supplies. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Electronic circuits are represented by 8 input lines. This device is well suited for TAPE AND REEL based on its reliable performance. Input lines are converted into binary equivalents by 3 output lines.
MC74VHC373DWR2 Features
20-SOIC (0.295, 7.50mm Width) package
74VHC series
8 Bits
74VHC373 family
20 pin count
20 pins
2/5.5V power supplies
MC74VHC373DWR2 Applications
There are a lot of ON Semiconductor MC74VHC373DWR2 Latches applications.
- Registers
- Counters
- A/D and D/A conversion
- Parallel data synchronization
- Phase comparator
- Synchronous frequency dividers
- Automotive ADAS
- Parallel Input
- Digital bus buffer
- A/D converters