Parameters |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74VHC373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
9.2 ns |
Turn On Delay Time |
4.9 ns |
Family |
AHC/VHC |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
8mA 8mA |
Logic Type |
D-Type Transparent Latch |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height Seated (Max) |
2.05mm |
Width |
5.275mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.209, 5.30mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Series |
74VHC |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
MC74VHC373MELG Overview
In the 20-SOIC (0.209, 5.30mm Width) package, it is embedded. A Tape & Reel (TR) package is used to package it. It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The voltage supply is 2V~5.5V. There is -40°C~85°C operating temperature. 74VHC is the series number of this FPGA. 8 Bits are used in the design of this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. As a member of the 74VHC373 family, it falls under that category. A 3.3V voltage supply is required for operation. It is equipped with 20 pin count. This electronic device is categorized as a AHC/VHC electronic device. This board has 20 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 5.5V. The device is powered by 2/5.5V power supplies. A supply voltage (Vsup) greater than 2V is required. In the circuit, there are 8 input lines that are constituted by an electronic circuit. On the basis of its reliability, this device is well suited for TAPE AND REEL. 3 output lines generate the binary equivalent of the input lines.
MC74VHC373MELG Features
20-SOIC (0.209, 5.30mm Width) package
74VHC series
8 Bits
74VHC373 family
20 pin count
20 pins
2/5.5V power supplies
MC74VHC373MELG Applications
There are a lot of ON Semiconductor MC74VHC373MELG Latches applications.
- Four-bit storage with output enable
- Communication systems
- Display
- Parallel data synchronization
- Registers
- PCs and Notebooks
- Shift Registers
- Serial Input
- Decade counting 7-segment decimal display
- Automotive ADAS