MC74VHC374DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.2 ns |
| Turn On Delay Time | 5.4 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC374DTR2 Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. Package Tape & Reel (TR)embeds it. The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 2V~5.5Vvolts. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74VHC series. A frequency of 120MHzshould not be exceeded by its output. A total of 1elements are contained within it. There is 4μA quiescent consumption. It has been determined that there have been 20 terminations. D latch belongs to the 74VHC374 family. A voltage of 3.3V is used as the power supply for this D latch. Its input capacitance is 4pFfarads. An electronic device belonging to the family AHC/VHCcan be found here. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. Flip flops designed with 8bits are used in this part. The maximal supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 8 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. An electrical current of 2/5.5V volts is applied to it. The flip flop contains 2ports. It operates with 3 output lines.
MC74VHC374DTR2 Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
MC74VHC374DTR2 Applications
There are a lot of ON Semiconductor MC74VHC374DTR2 Flip Flops applications.
- Bounce elimination switch
- Frequency division
- Count Modes
- Set-reset capability
- ESD performance
- ESCC
- Latch-up performance
- EMI reduction circuitry
- Matched Rise and Fall
- Safety Clamp
