Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
100Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74VHC4051 |
Pin Count |
16 |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Power Dissipation |
450mW |
Propagation Delay |
40 ns |
Turn On Delay Time |
245 ns |
Logic Function |
Demultiplexer, Demux, Multiplexer, Mux |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2V~6V ±2V~6V |
Halogen Free |
Halogen Free |
Supply Type |
Dual, Single |
Bandwidth |
80MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
160 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
130pF |
On-state Resistance Match-Nom |
18Ohm |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
76ns |
Signal Current-Max |
0.025A |
Height |
1.05mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC74VHC4051DTR2G Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. A 8 channel electronic part produces high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. A total of 1 circuits make up this switch device. Try searching with MC74VHC4051 if you're looking for variants. Internally, this switch multiplexer has a resistance of 100Ohm. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 6V to a switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 2V as the lowest voltage for the electrical part. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. In the case of dual power supplies, you should connect at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. In order to operate the 8 inputs, there are several steps to follow. It is possible to transfer data over a 80MHz-bandwidth.
MC74VHC4051DTR2G Features
8 Channels
Bandwidth: 80MHz
MC74VHC4051DTR2G Applications
There are a lot of ON Semiconductor MC74VHC4051DTR2G Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Optical Applications
- Multiplexers
- Private Branch Exchange (PBX)
- Precision instrumentation
- FTTH
- Automotive applications
- Intelligent PBX
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Precision test equipment