MC74VHC4052MG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 100Ohm |
| Max Power Dissipation | 500mW |
| Base Part Number | MC74VHC4052 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Throw Configuration | 4PST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 95MHz |
| Turn-Off Delay Time | 160 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 80pF |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74VHC4052MG Overview
As the electronic part is packed in 16-SOIC (0.209, 5.30mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. Multiplexers built on a SP4T switching circuit are built. The circuits in this analogue multiplexer number 2. Search with MC74VHC4052 if you are looking for analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. To find out what the 16 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 6V. An effective Dual, Single supply digital multiplexer. It is recommended to use 2V as the lowest voltage for the electrical part. Despite this switch device's dual supply capability, its voltage should not exceed 6V. With dual power supplies, you should attach at least 1V. The 8 inputs need to be operated in order to work. 95MHz bandwidths enable data to be transferred.
MC74VHC4052MG Features
Switch Circuit: SP4T
Bandwidth: 95MHz
MC74VHC4052MG Applications
There are a lot of ON Semiconductor MC74VHC4052MG Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Battery-powered systems
- E1 Multiplexer
- SONET
- Fault Tolerant Systems
- ISDN NT1/TA
- SDH
- Medical systems
- Video switching
- Data Acquisition Systems
