MC74VHC4053DTR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| -3db Bandwidth | 120MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 50pF |
| On-state Resistance Match-Nom | 18Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 76ns |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MC74VHC4053DTR2 Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Around -55°C~125°C TA is the extended operating temperature. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 6 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. A SPDT switching circuit is used to build these analog multiplexers. This multiplexer is composed of 3 circuits. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
MC74VHC4053DTR2 Features
6 Channels
Switch Circuit: SPDT
-3db Bandwidth: 120MHz
MC74VHC4053DTR2 Applications
There are a lot of Rochester Electronics, LLC MC74VHC4053DTR2 Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Channel Banks
- Fault Tolerant Systems
- SONET
- Audio and video routing
- HDTV
- PCMCIA cards
- Data Acquisition Systems
- Residential Gateways, Home Gateway/Router
- High-Voltage
