MC74VHC4053MG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 100Ohm |
| Max Power Dissipation | 500mW |
| Base Part Number | MC74VHC4053 |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 245 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 160 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 50pF |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -60dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74VHC4053MG Overview
Packed in 16-SOIC (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Operation at a temperature around -55°C~125°C TA. The electronic part delivers high-quality output through its 1 channels. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 3 circuits. Using the MC74VHC4053 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 100Ohm. The datasheets for the 16 pins explain the functions. A voltage higher than 6V should not normally be supplied to the switches. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. A dual power supply should have at least 1V voltage attached. In order to operate the 6 inputs, there are several steps to follow. In 120MHz-bandwidths, data can be transferred.
MC74VHC4053MG Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 120MHz
MC74VHC4053MG Applications
There are a lot of ON Semiconductor MC74VHC4053MG Analog Switches & Multiplexers ICs applications.
- Video switching
- Cable PC
- Industrial
- Audio and video routing
- Remote Powered Equipment
- Data switching
- Fiber to the Home
- RGB switches
- Fault Tolerant Systems
- Audio signal routing
