MC74VHC4066DTR2G
| Parameters | |
|---|---|
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74VHC4066 |
| Pin Count | 14 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 80 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 160MHz |
| Turn-Off Delay Time | 80 ns |
| On-State Resistance (Max) | 70Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 30Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 70Ohm |
MC74VHC4066DTR2G Overview
Presented in 14-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -55°C~125°C TA. The total number of terminations is 14. The electronic part provides high-quality output because it has 4 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. An electrical component like this is included in the 14 series. Unlike digital switches, these are based on SPST - NO switching circuits. Look for analog switch ic variants by searching with MC74VHC4066. It has an internal resistance of 70Ohm. The functions of 14 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 2V. The analogue multiplexer could operate on 40μA current. This analog switch requires a voltage of 2V~12V to drain from a single voltage supply. Among the inputs that can be operated are the 4 inputs. 160MHz bandwidths enable data to be transferred.
MC74VHC4066DTR2G Features
4 Channels
Switch Circuit: SPST - NO
40μA Supply Current
Bandwidth: 160MHz
MC74VHC4066DTR2G Applications
There are a lot of ON Semiconductor MC74VHC4066DTR2G Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- PBXs
- Imaging
- Digital cross connects (DSX-1)
- High-Voltage
- Industrial and process control systems
- Cell phones
- Multi-Line E1 Interface Cards
- E1 Multiplexer
- Cable Telephony – NIU, Set-Top Box, Home Side Box
