MC74VHC4066MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 85Ohm |
| Base Part Number | MC74VHC4066 |
| Operating Supply Voltage | 9V |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 80 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 80 ns |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~12V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC4066MEL Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -55°C~125°C TA degrees Celsius. A SPST - NO switching circuit is used to build these analog multiplexers. It consists of 4 circuits. MC74VHC4066 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 85Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 12V. A cost-effective Single supply type analogue multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 40μA current. Analogue multiplexers require a 2V~12V voltage to drain from a single voltage supply. Operating voltages range from 9V.
MC74VHC4066MEL Features
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 160MHz
MC74VHC4066MEL Applications
There are a lot of ON Semiconductor MC74VHC4066MEL Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Signal routing between systems
- PCMCIA cards
- Automotive applications
- Medical Instrumentation
- High speed data transmission line cards
- FTTH
- Industrial
- Relay replacements
- High-Voltage
