MC74VHC4316DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 110Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74VHC4316 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Turn On Delay Time | 130 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 140 ns |
| Max Dual Supply Voltage | 12V |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 90Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPST - NO/NC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC4316DR2G Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -55°C~125°C TA. There are 16 terminations totally. A 1 channel electronic part produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPST - NO/NC switching circuits. Look for analog switch ic variants by searching with MC74VHC4316. It has an internal resistance of 110Ohm. Datasheets for 16 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 6V. An effective Dual supply digital multiplexer. The lowest voltage the electronic part should receive is 2V. The switch device would be able to operate with 40μA current. Despite this switch device's dual supply capability, its voltage should not exceed 12V. A dual power supply should have at least 1V voltage attached. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The electronic component can function from 3V. A 4 input needs to be operated.
MC74VHC4316DR2G Features
1 Channels
Switch Circuit: SPST - NO/NC
40μA Supply Current
-3db Bandwidth: 160MHz
MC74VHC4316DR2G Applications
There are a lot of ON Semiconductor MC74VHC4316DR2G Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Fiber In The Loop (FITL)
- Cable Modem
- MP3 players
- DSUs
- DVD-R
- Microwave transmission systems
- DSLAMs
- Medical systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
