MC74VHC540DWR2
| Parameters | |
|---|---|
| Output Type | 3-State |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 7 ns |
| Family | AHC/VHC |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Buffer, Inverting |
| Control Type | ENABLE LOW |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74VHC540 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
MC74VHC540DWR2 Overview
Logical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 2V~5.5V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74VHC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. In the AHC/VHC family, the electric component belongs. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74VHC540" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 2/5.5V power supply. It is generally sold in TAPE AND REEL package. To supply the device, a minimum voltage of 2V is a must. 8 bits are included within the electrical component. 8 channels for high quality communication. Wireless transceiver is able to output 3 lines.
MC74VHC540DWR2 Features
Bus Driver/Transceivers
MC74VHC540DWR2 Applications
There are a lot of ON Semiconductor MC74VHC540DWR2 Buffers & Transceivers applications.
- Fiber distributed data interface (FDDI)
- Remote controls
- Ethernet circuitry
- IPTV front end
- Carrier phase observations
- Point-to-point networking
- Car alarm systems
- Cordless telephone
- Military satellite communications
- Televisions
