MC74VHC573DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC573DTR2 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Tape & Reel (TR) is the way in which it is packaged. In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. A 2V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. The 74VHC series is associated with this FPGA. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74VHC573 is the family name of it. With a supply voltage of 3.3V, it operates. It has 20 pins that makes it easy to use. AHC/VHC is the family name of this electronic device. 20 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. There is a maximum voltage supply (Vsup) that reaches 5.5V. There are 2/5.5V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 2V. Electronic circuits comprise 8 input lines. The device's reliable performance makes it a good choice for TAPE AND REEL. It follows that 3 output lines are generated from the binary equivalent of the input line.
MC74VHC573DTR2 Features
20-TSSOP (0.173, 4.40mm Width) package
74VHC series
8 Bits
74VHC573 family
20 pin count
20 pins
2/5.5V power supplies
MC74VHC573DTR2 Applications
There are a lot of ON Semiconductor MC74VHC573DTR2 Latches applications.
- Hammer
- A/D converters
- Parallel Output
- Digital bus buffer
- Serial Output Register
- Motor Drives
- BCD counting
- Shift register
- Communication systems
- Shift left with parallel loading
