MC74VHC573DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74VHC573DTR2G Overview
In the package 20-TSSOP (0.173, 4.40mm Width), it can be found. This package has the format of Tape & Reel (TR). There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. With a supply voltage of 2V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. The 74VHC series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. The family in which it belongs to is 74VHC573. A 3.3V voltage supply is required for operation. The device is equipped with 20 pins. AHC/VHC is the family name of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. There is a subcategory of FF/Latches for this part. 5.5V is the maximum supply voltage (Vsup). 2/5.5V power supplies are needed to operate it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The device's reliable performance makes it a good choice for TAPE AND REEL. Its 8mA output current allows for maximum design flexibility. Input lines are converted into binary equivalents by 3 output lines.
MC74VHC573DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74VHC series
8 Bits
74VHC573 family
20 pin count
20 pins
2/5.5V power supplies
MC74VHC573DTR2G Applications
There are a lot of ON Semiconductor MC74VHC573DTR2G Latches applications.
- Serial Input
- Automotive Infotainment
- Parallel data storage
- Automotive ADAS
- Display
- Pseudo-random code generators
- Frequency
- Control circuits
- Counter timers
- Avionics
