MC74VHC573MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC573MEL Overview
The package in which it is embedded is named 20-SOIC (0.209, 5.30mm Width). Packaged in the way of Tape & Reel (TR). The output it is configured with uses Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. With a supply voltage of 2V~5.5V, it operates. There is -40°C~85°C operating temperature. 74VHC is the series number of this FPGA. The design of this electronic part contains 8 bits. In this device, there are 20 terminations. 74VHC573 is its family. With the supply voltage set at 3.3V, it is able to operate. It has 20 pins that makes it easy to use. This electronic device is categorized as a AHC/VHC electronic device. The 20 pins are designed into it. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. In the subcategory FF/Latches, this part belongs. During this period, the maximum supply voltage (Vsup) reaches 5.5V. There are 2/5.5V power supplies required for this machine to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. As a result of its reliable performance, it is well suited for TAPE AND REEL. Input lines are converted into binary equivalents by 3 output lines. The circuit's superior flexibility is achieved through the use of 8 circuits.
MC74VHC573MEL Features
20-SOIC (0.209, 5.30mm Width) package
74VHC series
8 Bits
74VHC573 family
20 pin count
20 pins
2/5.5V power supplies
MC74VHC573MEL Applications
There are a lot of ON Semiconductor MC74VHC573MEL Latches applications.
- PCs and Notebooks
- Parallel data storage
- Shift left with parallel loading
- Four-bit storage with output enable
- Pattern Generators
- Display driver
- Communication systems
- Address register
- Counter timers
- Up-Down Johnson
