MC74VHC573MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74VHC573MELG Overview
A package called 20-SOIC (0.209, 5.30mm Width) contains it. A Tape & Reel (TR) package is used to package it. It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. The voltage supply is 2V~5.5V. A temperature of -40°C~85°C is used for operation. 74VHC is the series number of this FPGA. The design of this electronic part contains 8 bits. This device is designed with 20 terminations. It belongs to 74VHC573 family. The supply voltage of the device is 3.3V. It is equipped with 20 pin count. AHC/VHC is the family name of this electronic device. It is designed with 20 pins. It is mounted according to the Surface Mount method. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. 5.5V is the maximum supply voltage (Vsup). There are 2/5.5V power supplies required for this machine to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. A binary equivalent of the input line is generated by the 3 output lines.
MC74VHC573MELG Features
20-SOIC (0.209, 5.30mm Width) package
74VHC series
8 Bits
74VHC573 family
20 pin count
20 pins
2/5.5V power supplies
MC74VHC573MELG Applications
There are a lot of ON Semiconductor MC74VHC573MELG Latches applications.
- Shift left with parallel loading
- General-Purpose Register
- Buffer register
- Hammer
- Registers
- Shift register
- Counting
- Network Switches
- Communication systems
- Synchronous frequency dividers
