MC74VHC574DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 16.7 ns |
| Turn On Delay Time | 5.6 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC574DTR2 Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. It is included in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~5.5Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 74VHC series. You should not exceed 115MHzin the output frequency of the device. A total of 1elements are contained within it. There is 4μA quiescent consumption. It has been determined that there have been 20 terminations. You can search similar parts based on 74VHC574. Power is supplied from a voltage of 3.3V volts. Input capacitance of this device is 4pF farads. The electronic device belongs to the AHC/VHCfamily. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. As soon as 5.5Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be kept above 2V for normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 2/5.5V power supplies. This flip flop has a total of 2ports. In order to operate, the chip has 3 output lines.
MC74VHC574DTR2 Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
MC74VHC574DTR2 Applications
There are a lot of ON Semiconductor MC74VHC574DTR2 Flip Flops applications.
- Shift registers
- Synchronous counter
- Asynchronous counter
- Registers
- Count Modes
- Parallel data storage
- Common Clocks
- Differential Individual
- Load Control
- ATE
