MC74VHC74DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AHC/VHC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74VHC74DT Overview
The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. Temperature is set to -55°C~125°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74VHCseries contain this type of chip. Its output frequency should not exceed 115MHz Hz. T flip flop consumes 2μA quiescent energy. A total of 14 terminations have been made. The 74VHC74 family contains it. It is powered from a supply voltage of 3.3V. Its input capacitance is 4pF farads. It is a member of the AHC/VHCfamily of D flip flop. It is mounted by the way of Surface Mount. A total of 14pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. As soon as 5.5Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. The superior flexibility of this product is achieved by using 2 circuits. Due to its reliability, this T flip flop is well suited for RAIL. It operates with 1 output lines.
MC74VHC74DT Features
Tube package
74VHC series
14 pins
MC74VHC74DT Applications
There are a lot of ON Semiconductor MC74VHC74DT Flip Flops applications.
- Automotive
- Buffered Clock
- Safety Clamp
- Frequency Divider circuits
- Memory
- Shift Registers
- Counters
- Synchronous counter
- Bus hold
- Pattern generators
