MC74VHC74DTR2
| Parameters | |
|---|---|
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AHC/VHC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
MC74VHC74DTR2 Overview
14-TSSOP (0.173, 4.40mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. There is a Differentialoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 2V~5.5Vvolt supply, it operates as follows. It is operating at -55°C~125°C TA. This electronic flip flop is of type D-Type. The 74VHCseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 115MHz. As a result, it consumes 2μA of quiescent current without being affected by external factors. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74VHC74. It is powered by a voltage of 3.3V . This JK flip flop has a 4pFfarad input capacitance. The electronic device belongs to the AHC/VHCfamily. It is mounted in the way of Surface Mount. The 14pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. It reaches the maximum supply voltage (Vsup) at 5.5V. A normal operating voltage (Vsup) should remain above 2V. The superior flexibility is achieved through the use of 2 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
MC74VHC74DTR2 Features
Tape & Reel (TR) package
74VHC series
14 pins
MC74VHC74DTR2 Applications
There are a lot of ON Semiconductor MC74VHC74DTR2 Flip Flops applications.
- Shift Registers
- Registers
- Frequency Divider circuits
- Latch
- Computers
- Functionally equivalent to the MC10/100EL29
- Bounce elimination switch
- Modulo – n – counter
- ESD performance
- Guaranteed simultaneous switching noise level
