MC74VHC74MELG
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AHC/VHC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
MC74VHC74MELG Overview
The item is packaged in 14-SOIC (0.209, 5.30mm Width)cases. The Tape & Reel (TR)package contains it. T flip flop uses Differentialas its output configuration. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. In the operating environment, the temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74VHCseries of FPGAs. You should not exceed 115MHzin the output frequency of the device. There is 2μA quiescent consumption. The number of terminations is 14. If you search by 74VHC74, you will find similar parts. The D flip flop is powered by a voltage of 3.3V . A JK flip flop with a 4pFfarad input capacitance is used here. An electronic device belonging to the family AHC/VHCcan be found here. It is mounted in the way of Surface Mount. There are 14pins on it. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. As soon as 5.5Vis reached, Vsup reaches its maximum value. Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility of this product is achieved by using 2 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It is designed with 1 output lines.
MC74VHC74MELG Features
Tape & Reel (TR) package
74VHC series
14 pins
MC74VHC74MELG Applications
There are a lot of ON Semiconductor MC74VHC74MELG Flip Flops applications.
- Patented noise
- Reduced system switching noise
- Data storage
- Count Modes
- Convert a momentary switch to a toggle switch
- Memory
- 2 – Bit synchronous counter
- Power down protection
- Memory
- Asynchronous counter
