MC74VHCT139AD
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74VHCT |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | COMMERCIAL |
| Circuit | 1 x 2:4 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | AHCT/VHCT |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | INVERTED |
| Propagation Delay (tpd) | 16.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MC74VHCT139AD Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tube represents its packaging.Mounting is performed using Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.As a member of 74VHCT series, the multiplexers can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 16 can be found on this turn signal switch.As the end of conductors, it uses GULL WING.I would like to refer to the logic switch as a member of the AHCT/VHCT family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.
MC74VHCT139AD Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
MC74VHCT139AD Applications
There are a lot of Rochester Electronics, LLC MC74VHCT139AD Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Home automation system
- To select different devices in microprocessor output
- Idle motor
- Electronic circuits
- Microprocessor input/output systems
- Data demultiplexing
- HD surveillance system
- Communication system
- Make half adder
