MC74VHCT244ADWRG
| Parameters | |
|---|---|
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Control Type | ENABLE LOW |
| Number of Output Lines | 3 |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 8.4 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10.5 ns |
| Family | AHCT/VHCT |
| Logic Function | Buffer, Inverting |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 4 |
MC74VHCT244ADWRG Overview
Logical driver uses a neat SOIC package. Tape & Reel (TR) external packaging. All of the 2 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a AHCT/VHCT family part that is attached to this electronic component. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct -8mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. Wireless transceiver is able to output 3 lines. It is known as a BUS DRIVER logic IC. Digital buffer is characterized to have 8 inputs.
MC74VHCT244ADWRG Features
Bus Driver/Transceivers
High Level Output: 8mA
Low Level Output: -8mA
BUS DRIVER Logic IC
MC74VHCT244ADWRG Applications
There are a lot of ON Semiconductor MC74VHCT244ADWRG Buffers & Transceivers applications.
- AV receiver
- Remote controls
- Military satellite communications
- SONET/SDH Network
- Optical sub-assembly (OSA)
- Relays
- Metro access rings
- IPTV front end
- Switching system
- Thermal management
